Kiss those Math Headaches GOODBYE!

Posts tagged ‘Ratios’

Answer, Fun Math Problem


Answer to problem about the circular and square pegs and holes.

The “fit” for each situation is the following ratio:
(Area of Inner Figure) ÷ (Area of Outer Figure)

For the square peg in a round hole —
Call the radius of the circle r.
Then the diagonal of square “peg” = 2r
Notice that by slicing the square along its diagonal,
we get a 45-45-90 triangle, with the diagonal being
the hypotenuse and the sides being the two equal legs.
Using the proportions in a 45-45-90 triangle,
side of square peg = r times the square root of 2
Multiplying this side of the square by itself gives
us the area of the square, which comes out as:
2 times the radius squared

This being the case,
Area of square is: 2 times radius squared, and
Area of circle is: Pi times radius squared, and so …

Cancelling the value of the radius squared, we get:
Ratio of (Area of square) to (Area of circle) is:
2÷Pi = 0.6366

For the round peg in a square hole —
Call radius of the circle r.
And since the diameter of the circle is the same length as
the side of the square, the side of the square = 2r
Multiplying the side of the square by itself to get the
area of the square, we find that the area of the square
is given by: 4 times radius squared.

This being the case,
Area of circle is: Pi times radius squared
Area of square is: 4 times radius squared, and so …

Ratio of (Area of circle) to (Area of square) is therefore:
Pi ÷ 4 = 0.7854

Of the two ratios, the ratio of the circular peg in a square hole
is greater than that of the square peg in a circular hole.

Therefore we can say that the circular peg in a square hole
provides a better fit than a square peg in a circular hole.

And that is the answer!

Advertisements

FUN MATH PROBLEM — Circling the Square & Vice-Versa


From time to time I will post interesting math problems.

Feel free to try these problems. Share them with friends and colleagues. Use them however you see fit!

I will post the answer to the problems two days later, after people have had time to respond.

To post your response, simply send an email to me @ info@SingingTurtle.com
and make your Subject: Fun Problem.

The problem: Which provides the fuller fit? Putting a circular peg in a square hole, or putting a square peg in a circular hole? To get credit, show all work, and justify your answer by expressing each “fit” as a percent.

A few term-clarifications, to help you do this correctly:

a) By “fit,” I mean the ratio of the smaller shape to the larger shape, expressed as a percent. For
example, if a ratio is 4 to 5, that would represent a “fit” of 80 percent.

b) For the circular peg in the square hole, assume that the diameter of the circle equals the side of the
square. For the square peg in a circular hole, assume that the diameter of the circle equals the diagonal of the square.

c) By “fuller fit,” I mean the larger of the two ratios.

Have fun!